Dacor EORS230 Dokumentacja

RenaissanceModels: EOR, MORWallInstallationOvenInstructionsPart No. 102579 Rev. K

Verify the Package ContentsVerify that all the components below have been provided. If any item is missing or damaged, please contact your dealerimmed

Removing the Oven Door on ModelEORS136:1. Open the door to its fully opened position.2. Rotate the catch over the retaining arm on each hinge.CatchRet

Electrical Connection-(continued)Connecting to aSystem1.,,,,Four Wire ElectricalSeparate the wires coming out of the appliance conduit.Connect the whi

Connecting to a Three Wire ElectricalSystem with External Ground - Where LocalCodes PermitWARNING• Do not ground the appliance to a gas supply pipe or

Installing the Oven in the Cabinet[_ WARNING• Failure to properly install the mounting screws mayresult in movement or tipping of the oven during user

Installing the Exhaust GrillWith the oven secured to the cabinet, install the exhaustgrill by mounting it to the oven with the two (2) providedscrews.

Reinstalling the Oven Door (Cont)To re-install the oven door on model EORS136:WARNINGTo avoid personal injury or damage to the door fromit falling off

Installation ChecklistWARNINGTo ensure proper installation;the installer must completethe checklist below to make sure that no part 0f the in-stallati

16 c_mcar

4#Dacor • 600 Anton Blvd. Suite 1000 Costa Mesa, CA 92626 • Phone: (800) 793-0093 • Fax: (626)403-3130 • www.Dacor.comAmerican Made*Family OwnedThe Li

All specifications are subject to change without notice. Dacor ®assumes no liability for changes to specifications.© 2007 Dacor, all rights reserved.

Before You Begin ... 1Important Safety Instructions ...

General Safety PrecautionsTo reduce the risk of fire, electric shock, serious injury or death when using your appliance, follow basic safety precau-ti

If You Need Help...If you have questions or problems with installation, contactyour Dacor dealer or the Dacor Customer Service Team.For repairs to Dac

Power Supply RequirementsIt is the owner's responsibility to ensure that a licensedelectrician performs the installation of the electrical sup-pl

Product DimensionsAll tolerances: +1/16 (+1.6 mm), unless otherwise stated.Top ofchassisTop ofchassisCCDAConduit:60" (152 cm)Control panel / I&qu

Installation PlanningWARNING I "observe all governing codes and OrdinanCes during plum Ining and instal!ationl C0ntact your local building depart

Cabinet Dimensions Cabinet tolerances: +1/16 (1.6 mm),-0, unless otherwise stated.N1" (2.5 cm) Min.to bottom ofcabinet doortI-/IIIt1" (2.5 c