Dacor DYWS4 Instrukcja Użytkownika Pobierz pdf

Trim Kit

Part Number AWSTK24

INSTALLATION

INSTRUCTIONS

WINE DISPENSING SYSTEM MODEL: DYWS4

Part No. 107554 Rev. A

Parts Included with kit

Bottom left trim

bracket

Top trim bracket

Foam Strips

(1 long, 2 short)

Bottom right trim

bracket

Right trim

piece

Left trim

piece

Top trim

piece*

*The top and bottom trim pieces are identical, but

installed in the opposite orientation from each other.

Bottom

trim piece*

(8) #8 x 3/8 Phillips

head screws (PN 83263)

(9) #10 x 1/2 Phillips

head screws (PN 83022)

(1) Base divider

(2) Base supports

(8) Flat head Phillips head

screws (PN 107578)

(8) Fiber washers

(PN 83555)

IMPORTANT: The wine dispensing utilizes a thermo-electric cooling system that can normally

cool the bottle bay to a temperature 25°F less than the ambient air outside the unit. This trim kit

limits system air circulation slightly, limiting the cooling capability to 22°F less than ambient. Be

sure that this limitation is acceptable before installing this kit.

1 2 3 4 5 6 7 8

Podsumowanie treści

Strona 1 - INSTRUCTIONS

Trim Kit Part Number AWSTK24INSTALLATIONINSTRUCTIONSWINE DISPENSING SYSTEM MODEL: DYWS4Part No. 107554 Rev. AParts Included with kitBottom left trim b

Strona 2

Wine Dispensing System Trim Kit InstructionsPage 2For proper fit, the cutout dimensions shown are required. The spacing above and below the cutout are

Strona 3 - Installation Instructions

Wine Dispensing System Trim Kit InstructionsPage 3STEP 1 Peel the protective backing off of the longest of the 3 foam strips and at-tached it to th

Strona 4 - Base Installation

Wine Dispensing System Trim Kit InstructionsPage 4STEP 3 Insert the base assembly, assembled in step 1, into the cutout with the divider toward the b

Strona 5

Wine Dispensing System Trim Kit InstructionsPage 5Base assemblyBottom left trim bracket Bottom right trim bracket STEP 7 Attach the bottom left and

Strona 6 - Top Trim Bracket Installation

Wine Dispensing System Trim Kit InstructionsPage 6STEP 9 Hold the top trim bracket in the mounting position on the top edge of the cut-out. Center i

Strona 7

Wine Dispensing System Trim Kit InstructionsPage 71 Inch (2.5 cm) 1 Inch (2.5 cm) 1 Inch (2.5 cm) Foam strip, 2 places STEP 13 With the help of at l

Strona 8

Dacor ● 14425 Clark Avenue, City of Industry, CA 91745 ● Phone: (800) 793-0093 ● Fax: (626) 403-3130 ● www.dacor.comSTEP 14 Assemble the front trim p